The subject of the offer is the regeneration of catalytic converters involving the welding of new metal catalytic converter inserts into the original housings. The dimensions of the inserts are optimally matched to this car in terms of diameter and length and are 125/100 mm. The emission standard of the cartridge is Euro5/Euro6 and the capacity is 400 cpsi. The manufacturer of the cartridges is RFC and the cartridges have all the necessary approvals and a 12-month warranty. We also have sports cartridges with an increased throughput of 200 cpsi. The sockets of the lambda probe are welded a few cm backwards to fit the cartridges of the appropriate length (the probes still fit perfectly).

We do the regeneration in one day and send you a catalytic converter ready for installation.

Sending us a catalytic converter fill out the form :

https://kat-eko.com/pl/content/6-regeneracja-katalizatorow

Also, do not forget to remove the cause of faster wear of the cartridge, if its wear has occurred faster than standard the cause may be oil or fuel entering the exhaust system. If you have a gas system installed and, in addition, it is not adjusted too well, it also contributes to faster wear of the original ceramic cartridges, which are not resistant to the higher temperature of gas combustion.

OE original no:

4G0 254 200 KX

4G0 254 200 K

4G0 254 202 MX

4G0 254 202 GX

4G0 254 200 SX

4G0 254 202 HX

4G0 254 202 FX

4G0 254 202 LX

4G0 254 202 JX

4G0 254 252 EX

4G0 254 250 FX

4G0 254 252 JX

4G0 254 252 X