- New
Universal ceramic catalytic converter insert with a flow rate of 400 cpsi, designed to be welded into the housing (manifold). Compatible with gasoline engines.
Not recommended for LPG systems.
If your car has an LPG system installed or you plan to have one installed, choose a metal insert.
The catalytic converter insert meets the requirements of the following European directives:
Manufacturer’s warranty: 12 months or 50,000 km.
The catalytic converter insert is selected based on the emissions standard it must meet and on its dimensions. Unfortunately, no catalog lists the insert’s dimensions, since, in theory, it is a non-replaceable part; therefore, to select the correct insert, you must measure the diameter and length of the catalytic converter housing. Next, subtract the wall thickness of the catalytic converter housing, since the insert is located inside the housing. For example, if the catalytic converter housing has a diameter of 110 mm, an insert with a diameter of 105 mm will be suitable.
Specific References
CAT031-1
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
0630775
G03HC0
SIL-MERC-2-KONC
End silencer/resonator Mercedes SL 500 (R129) facelift version
Fits cars:
Original, refurbished end silencer/resonator for Mercedes SL500 (R129) facelift version.
The silencer has been carefully restored and powder-coated.
The product is fully functional and ready to use.
5854216
55565023
KS21
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
MS11LCC0021
CAT003NS
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
CAT036-1
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
CAT032-1
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
CAT052
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
KS11
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction: