- -30%
- 200 cpsi
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
S409 stainless steel sports catalytic converter with a metal S-type insert featuring 3 cores for increased performance and durability. Compatible with gasoline, diesel, and LPG engines. When installed in parallel, they support an engine displacement 50% greater than the rated capacity. The cone on one side has been shortened, allowing the catalytic converter to be installed in vehicles with limited space. The ceramic coating significantly reduces heat loss from the exhaust system, which helps maintain a higher exhaust gas temperature inside the system. As a result, exhaust gases move faster, which can improve gas flow and engine performance. Higher temperatures inside the catalytic converter result in greater efficiency in exhaust gas purification—the ceramic coating allows it to reach its optimal temperature faster and emit less heat to the outside.
The catalytic converter must be selected according to the specifications provided by the vehicle manufacturer. Two factors are most important: adequate flow capacity and the emissions standard.
Simply purchasing a catalytic converter that meets the correct Euro standard is not enough; its flow capacity (cpsi) is equally important. If it is too low or too high, it can disrupt the operation of the exhaust system and prevent the converter from performing at levels close to the original specifications.
If you are unsure about purchasing the correct catalytic converter, contact us via the form and provide your VIN. Based on this, we will verify which variant is appropriate.
Specific References
Producer: Kateko Rafał Białousz
ul. Miętowa 31 • 10-687 Bartąg • Poland
e-mail: [email protected]
Entity responsible:
Kateko Rafał Białousz
ul. Miętowa 31 • 10-687 Bartąg
e-mail: [email protected]
Remove from packaging before use!
Not suitable for children under 3 years old.
