- -30%
- 200 cpsi
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
S409 stainless steel sports catalytic converter with a metal S-type insert featuring 3 cores for increased performance and durability. Compatible with gasoline, diesel, and LPG engines. When installed in parallel, they support an engine displacement 50% greater than the rated capacity. The cone on one side has been shortened, allowing the catalytic converter to be installed in vehicles with limited space. The heat shield, made of S304 stainless steel, is primarily designed to provide protection against overheating even under extreme conditions such as high ambient temperatures or intense engine operation.
The catalytic converter must be selected according to the specifications provided by the vehicle manufacturer. Two factors are most important: adequate flow capacity and the emissions standard.
Simply purchasing a catalytic converter that meets the correct Euro standard is not enough; its flow capacity (cpsi) is equally important. If it is too low or too high, it can disrupt the operation of the exhaust system and prevent the converter from performing at levels close to the original specifications.
If you are unsure about purchasing the correct catalytic converter, contact us via the form and provide your VIN. Based on this, we will verify which variant is appropriate.
Specific References
Producer: Kateko Rafał Białousz
ul. Miętowa 31 • 10-687 Bartąg • Poland
e-mail: [email protected]
Entity responsible:
Kateko Rafał Białousz
ul. Miętowa 31 • 10-687 Bartąg
e-mail: [email protected]
Remove from packaging before use!
Not suitable for children under 3 years old.
