Catalyst - 2x55 mm intake EURO 2
Dimensions:
Specific References
MO20
DO-A30
Do you need a different catalytic converter input/output diameter?
If you want a diameter larger than 63.5 mm then just cut the catalytic converter cone in the right one to the desired diameter and if 63.5 mm diameter is too large for the Shadow then you can get the reductions available in the link below:
MP50L1
MP25
MP-A25
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
KS11
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
MO-A16
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
MP-A50
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
CP20A
KS11
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
KSS21
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
DO-A50
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
MP50L
DO-A21
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
.
MO15
KS11
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
Polski
Italiano
