VW Crafter
2.0 Tdi 2016 ->
The subject of the offer is the regeneration of the catalytic converter consisting of welding a new metal catalytic converter insert into the original housing. The dimensions of the insert are optimally matched to this car in terms of diameter and length and are 150/100 mm. The cartridge's emission standard is Euro 6 and the capacity is 400 cpsi. The manufacturer of the cartridge is a well-known Polish company Polonez AWG and the cartridge has all the necessary approvals and a 12-month warranty.
We do the regeneration in one day and send you back the catalyst ready for installation.
When sending the catalytic converter to us fill out the form :
https://kat-eko.com/pl/content/6-regeneracja-katalizatorow
Also, do not forget to remove the cause of faster wear of the cartridge, if its wear has occurred faster than standard the cause may be oil or fuel entering the exhaust system.
If you feel up to it, you can also replace the cartridge yourself, which you can buy from the link below:
https://kat-eko.com/pl/wklady-katalizatorow/391-2546-wklad-katalizatora-diesel-awg-5904347525248.html#/37-dlugosc_wkladu-100_mm/59-norma_euro-euro_6/63-przepustowosc_cpsi-400/85-srednica_wkladu-150_mm
You need to cut the original housing, weld the insert from the inside and weld the housing. The cartridge should be installed in accordance with the arrow engraved on the cartridge housing, which indicates the direction of the flue gas flow.