Universal AWG Polonez catalytic converter designed for capacities from 2.0 to 5.0 liters. The catalytic converter is designed for installation in cars with gasoline engines and also in cars equipped with LPG installation. The design of the catalytic converter based on a durable metal insert is resistant to the higher combustion temperatures generated by the combustion of gas.
The product is certified as follows:
The catalytic converter depending on the selected emission standard meets the requirements of the European directive:
Manufacturer's warranty: 12 months or 50,000 km.
Specific References
MP25
MP-A25
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
KS11
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
DO-A50
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
DO-A30
Do you need a different catalytic converter input/output diameter?
If you want a diameter larger than 63.5 mm then just cut the catalytic converter cone in the right one to the desired diameter and if 63.5 mm diameter is too large for the Shadow then you can get the reductions available in the link below:
KS11
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
MO20
DO-A19
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
KSS11
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
CO15
KS21
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
KSS21
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
MP50L
KSS21
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
KSS41
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
MP20
Polski
Italiano
