Universal stainless steel catalytic converter with ceramic cartridge. Compatible with gasoline engines.
Not recommended for LPG systems.
If you own a car with a gas installation or plan to install one, opt for a catalytic converter with a metal insert.
Product is certified as follows:
The catalytic converter, depending on the selected configuration, meets the requirements of the European Directive:
Manufacturer's warranty: 12 months or 50,000 km.
Specific References
DP50
MP50
MO12
DO-A30
Do you need a different catalytic converter input/output diameter?
If you want a diameter larger than 63.5 mm then just cut the catalytic converter cone in the right one to the desired diameter and if 63.5 mm diameter is too large for the Shadow then you can get the reductions available in the link below:
CO15
MP15
MP501
DP-A25
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
MP-A25
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
MO-A16
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
MP502
KS11
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
MO-A20
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
CP20A
KSS11
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
MP-A50
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
Polski
Italiano
