Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
Universal stainless steel catalytic converter with metal insert. Compatible with diesel engines. Mounted in parallel support engine capacity up to 5 liters.
Catalytic converter, depending on the selected configuration, meets the requirements of the European Directive:
Manufacturer's warranty: 12 months or 50,000 km.
Specific References
DP50
MO-A20
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
MO-A30
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
MO-A50
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
KSS41
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
DO-A50
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
MP502
MO20
KSS11
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
CO19
KS21
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
MO30
KSS11
Do you need a larger diameter than 63.5 mm? - Cut the cone in the right place. Want a smaller one? - use reduction:
MP501
MP50
DO-A30
Do you need a different catalytic converter input/output diameter?
If you want a diameter larger than 63.5 mm then just cut the catalytic converter cone in the right one to the desired diameter and if 63.5 mm diameter is too large for the Shadow then you can get the reductions available in the link below:
Polski
Italiano
