The subject of the offer is the regeneration of catalytic converters, which involves welding new metal catalytic converter inserts into the original housings. The dimensions of the inserts are optimally matched to this car in terms of diameter and length and are 100/60 mm and 120/80 mm. The cartridge's emission standard is Euro 4 and the capacity is 500 cpsi. The manufacturer of the cartridges is a well-known Polish company Polonez AWG and the cartridges have all the necessary approvals and a 12-month warranty.

The smaller front 100/60 mm cartridges, which are contained between the first and second lambda probes, are responsible for the catalytic converter efficiency error display. If the rear ones are ok then you can not do them and the cost of regeneration will then be 2000 pln. However, taking into account the need to remove the engine to remove the catalytic converters in this model, it is not worth the risk and additional costs of removing the engine again in the future, and it is worth doing the rear ones as well. You can weld cheaper Euro 3 or Euro 2. Then the cost of remanufacturing is as follows:

Euro 4 + Euro 4 - 4640 pln

Euro 4 + Euro 3 - 4140 pln

Euro 4 + Euro 2 - 3600 pln

We also have sports cartridges with increased capacity of 200-400 cpsi.

We do the regeneration in one day and send you back the catalyst ready for installation.

Sending the catalyst to us fill out the form :

https://kat-eko.com/pl/content/6-regeneracja-katalizatorow